Sodium Chlorite + Activator Kit 140 ml Dioxilife
SODIUM CHLORITE KIT + ACTIVATOR 140 ML
Precursor for obtaining in situ a biocide (chlorine dioxide), for exclusive use for the purification and disinfection of water for human or animal consumption. Precursor included in art. 95 of EU Regulation 528/2012 on biocides.
COMPOSITION
Aqueous solution of 25% NaCIO2 sodium chlorite, precursor substance of a biocide (chlorine dioxide) that is obtained in situ by acidification with the 4% HCL ACTIVATOR. The set consists of 2 containers, 1 of Sodium Chlorite (25%) and 1 HCl Activator (4%).
INSTRUCTIONS FOR USE AND DOSAGE
For disinfection of drinking water:
One drop of HCl Activator is used for each drop of Sodium Chlorite (1:1). Measure 2 drops of sodium chlorite and 2 drops of activator for each liter of water to be treated, in a dry container (non-metallic) regardless of the number of activated drops.
Wait about 45 seconds until you obtain a golden amber color.
The mixture needs to be diluted later in water. Add water (>150 ml) to stabilize the activated solution as soon as possible. The intense yellow color indicates the degree of saturation of the CIO2 gas that evaporates over time.
This yellowish solution should be diluted in the water to be treated as soon as possible to ensure maximum effectiveness, and allowed to act for at least 30 minutes.
Do not consume the treated water until the active chlorine level drops below 1.5 ppm. If when measuring the chlorine level it is negligible, repeat the operation until the level of active chlorine in the water is between 0.5-1.5 ppm.
The amount of product to be dosed and the exposure time will always depend on the quality of the water to be treated.
Use with caution, always read labels and product information. Store in a cool, dry place, and in an upright position.
Do not expose to sunlight to avoid degradation. It is not necessary to keep the containers in the refrigerator at reasonable temperatures when the ambient temperature is below 22-24º C.
For disinfection of drinking water:
Mix in equal parts, in a clean, dry (non-metallic) glass, 25 ml of NaClO2 Sodium Chlorite Solution (25%) and 25 ml of HCl Activator (4%).
Wait about 45 seconds until you obtain a golden amber color.
Dilute the mixture in 5-10L of water, depending on the level of dirt, in a closed container.
In a ventilated place, apply this dilution to the surfaces using a cloth or mop, or by dipping the tools. Let it act for at least 5 min. and rinse later with plenty of water before use.
CHARACTERISTICS
The container contains 140 ml Sodium chlorite + HCL Activator 4%
25% concentrated solution.
Very high quality and purity.
Sodium chlorite should never be used alone. It should always be activated with a safe acid such as HCL 4%.
Mixing equal parts of sodium chlorite with an acid generates the disinfectant biocide substance.
140 ml opaque container, to preserve all its quality and optimal conservation.
It is very important to keep in mind that exposing the contents to ultraviolet light deteriorates the product.
HAZARD INDICATIONS SODIUM CHLORITE
Use biocides in a safe way. Always read the label and information about the biocide before using it.
Acute Tox. 4: H302 – Harmful if swallowed Aquatic Chronic 1: H410 – Very toxic to aquatic organisms with long lasting effects. Eye Dam. 1: H318 – Causes serious eye damage Met. Corr. 1: H290 – May be corrosive to metals STOT RE 2: H373 – May cause damage to organs through prolonged or repeated exposure (Oral) EUH032: Contact with acids releases very toxic gases.